Needle systems
WE 1 PIN
Pin system for deep embossing
Function:
The tip of the pin is activated by compressed air to oscillate individually. The oscillation frequency is approximately 150 Hz as soon as the compressed air passes through.
Recommended operating conditions:
4-6 bar operating working pressure with filtered and lightly oiled air.
Technical data:
Connecting threading M16x1.5.
Cylinder diameter 12 mm.
Maximum stroke height 4 mm.
Pin diameter 4 mm.
Pin angle 60°, 90° or 120°
WE2 PIN
Standard pin system for ordinarily marking
Function:
The tip of the pin is activated by compressed air to oscillate individually. The oscillation frequency is approximately 200 Hz as soon as the compressed air passes through.
Recommended operating conditions:
4-6 bar operating working pressure with filtered and lightly oiled air.
Technical data:
Connecting threading M16x1.5.
Cylinder diameter 12 mm.
Maximum stroke height 4 mm.
Pin diameter 3 mm.
Pin angle 60°, 90° or 120°
WE2 PIN long
Extreme long pin system for marking in deep spaces
Function:
The tip of the pin is activated by compressed air to oscillate individually. The oscillation frequency is approximately 200 Hz as soon as the compressed air passes through.
Recommended operating conditions:
4-6 bar operating working pressure with filtered and lightly oiled air.
Technical data:
Connecting threading M16x1.5.
Cylinder diameter 14 mm.
Maximum stroke height 4 mm.
Pin diameter 3 mm.
Pin length 128 mm.
Pin angle 60°, 90° or 120°